News

L&L Products has developed a new generation of aerospace grade materials to reach the latest health, safety and FST standards.

March 9th, 2017 admin

Altorf, France, March 07, 2017 – L&L Products has worked to develop a new generation of materials dedicated to the construction of aircraft interiors. The main focus has been to dramatically improve the Health & Safety properties of the materials using innovative new components to eliminate REACH classified substances such as borate zinc, trioxide antimony, […]

L&L Products Simplifies Manufacturing and Improves Worker Safety through Use of Elastomeric Adhesive, A-J215

February 24th, 2017 admin

Altorf, France, February 22, 2017 – L&L Products has worked to develop an elastomeric adhesive, A-J215, to help bond and seal FRP, stainless steel and aluminium applications at one of the world’s leading bus manufactures. For many years, this major bus maker has employed a conventional polyurethane elastic adhesive to bond and seal the side, […]

L&L Products Supplies Bonding Solution to Top Composites Customer for Automotive Application using Structural Adhesive A-K083

February 2nd, 2017 admin

Altorf, France, February 01, 2017 – L&L Products joined a top composite customer to work together on a solution to bond a rear spoiler made from carbon fiber reinforced polymer (CFRP) using a structural adhesive in an automotive application. The rear spoiler consists of a relatively complex design and multiple parts to be assembled into […]

L&L Products structural adhesive film bonds together CFRP and steel in BMW 7 Series

June 29th, 2016 admin

A recent video uploaded by Composites Today features an application using L&L’s structural adhesive film in the new BMW 7 Series.  At 2 minutes and 45 seconds, the video shows the CFRP part being bonded together by L&L’s structural adhesive film to the steel B-pillar. By bonding together CFRP and steel, the B-pillar has the […]

L&L Products L-F610 film adhesive speeds finishing of composite armour panels

April 14th, 2016 admin

March 2016 L&L Products’ reformable, epoxy adhesive film is enabling producers of composite armour to apply a paint finish to ultra-high molecular weight polyethylene panels with the minimum of preparation time and without the need for primers. Previously, in order to finish ballistic panels it would be necessary to apply an epoxy-based primer using a […]

L&L’s A-K series is a range of high-performance structural adhesives intended for use in structural bonding applications for vehicle assembly

April 14th, 2016 admin

March 2016 A-K series materials cure completely at room temperature via a two-component technology system. Typical applications for this new range of materials include: • Structural bonding of truck body assemblies, high roof structures, grill assemblies, bumper modules, closures, aerodynamic trim, fender structures, hood assemblies and cockpit structures; • Structural bonding of bus side panels, […]

L&L Products supports BMW 7-series carbon core body construction

March 2nd, 2016 admin

February 2016 BMW has launched in its new 7-series a car body construction that combines carbon fiber reinforced plastic (CFRP), aluminum and steel. This new development has won industry accolades and the prestigious EuroCarBody Award that is regarded as the world’s most important award for innovations in car body construction. L&L Products has been an […]

New aerospace distribution agreement for the West Coast of the United States

February 18th, 2016 admin

February 2016 L&L Products and David H. Sutherland & Co. are pleased to announce an aerospace distribution agreement for the West Coast of the United States. This agreement with David H. Sutherland supports L&L Products’ continuous efforts to better serve its customers in the region. The agreement also enables David H. Sutherland to offer a […]

A range of room temperature-curing two-component adhesives

October 21st, 2015 admin

October 2015 L&L Products announces a range of room temperature-curing two-component fire, smoke, toxicity (FST) compliant adhesives for simple assembly of composite parts. L&L’s adhesives hold a high-strength bond and are designed to meet the stringent requirements of the aerospace industry. A 12-second vertical burn is the minimum specification to meet FAR 25; L&L’s adhesives […]

Upcoming Shows

May 11th, 2015 admin

March 14-16, 2017 – Paris, France JEC World Composites JEC Paris is the largest international gathering of composites professionals. May 10-12, 2017 – Beijing, China SAMPE China 2017 SAMPE China will promote advanced composite materials in the service of lighter, stronger, more efficient, more environmental protection of green industry innovation and development. August 23-25, 2017 […]